DEWALT DCK264P2T 18v Brushless Nailer Twin Pack with 2x5ah+Tstak Case
DCK264P2T-GB Product Overview
This is an 18v XR Nailer twin kit including the DCN692 Framing Nailer, DCN660 Finishing Nailer, 2 x DCB184 5Ah batteries, a charger and kitbox.
Part No: DCK264P2T-GB(DEWPDCK264P2T)
DCK264P2T-GB Technical Specifications
DEWALT DCN660N 18v 2nd Fix Nailer
- Voltage: 18 v
- Nail Diameter: 1.6 mm
- Nail Length: 32 - 63 mm
- Magazine Angle: 20°
- Magazine Loading: Rear - load
- Magazine Capacity: Up to 110 Nails
- Fastener Type: 16 Ga
- Collation Type: Stick
- Trigger Type: Bump and Sequential
- Width: 96 mm
- Height: 302 mm
- Weight: 2.6 kg
- Integrated Belt Hook: Yes
- Noise LWA/KWA, 1s, d: 92/3
- Noise LpA/KPA, 1s, d: 81/3
- Vibration Emission Value ah: 2.5 m/s²
- Uncertainty K1 (Vibration): 1.5 m/s²
DCN692N 18v 90mm Framing Nailer
- Voltage: 18 v
- Nail Diameter: 2.8 - 3.3 mm
- Nail Length: 50 - 90 mm
- Magazine Angle: 30 - 34°
- Magazine Loading: Rear - load
- Magazine Capacity: Up to 55 Nails
- Collation Type: Stick
- Trigger Type: Bump and Sequential
- Length: 345 mm
- Width: 125 mm
- Height: 338 mm
- Weight: 4.1 kg
- Nailer Operating Mode: Selective
- Integrated Belt Hook: Yes
- Jam Clearing: Yes
- Impact Energy: 105 J
- Temperature Range: -20 to 50°C
- Fault Indicator: Yes
- Noise LWA/KWA, 1s, d: 93/3
- Noise LpA/KPA, 1s, d: 82/3
- Vibration Emission Value ah: 2.5 m/s²
- Uncertainty K1 (Vibration): 1.5 m/s²
DEWALT DCK264P2T 18v Brushless Nailer Twin Pack with 2x5ah+Tstak Case
DCK264P2T-GB Key Features
DCN660N 18v 2nd Fix Nailer
- Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second
- Depth of drive can be easily adjusted using the thumb wheel depth adjuster
- Compact, lightweight and ergonomic design makes the tool easy and comfortable to use but durable enough for worksite environment
- BRUSHLESS motor offers runtime that cannot be beaten in a compact package
- Mechanical rather than gas operation offers low running costs and consistent performance at low temperatures
- Trigger and contact trip lock-off and prevent accidental dis-charge of fastener
- Tool free stall / jam clearance minimises down time
DCN692N 18v 90mm Framing Nailer
- Cordless design allows you to work without the inconvenience and safety risk of trailing lead
- Two speeds - or power levels - to optimise the nailer for firing all lengths of nails
- The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
- Reversable belt/rafter hook provides increased portability and versatility on the job-site
- Benefit from longer runtime, quicker readiness to fire, less recoil and more durability when firing short nails
- Tool free stall/jam clearance minimises user down time
- Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud
- User can engage contact trip lock-off and prevent accidental dis-charge of fastener
- Versatile 30 - 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails
- BRUSHLESS motor technology offers the power to fire a 90mm Ring Shank nail in Soft Wood and 63mm into Hard Woods
- Depths can be easily adjusted using the thumb wheel depth adjuster
- Increased visibility and durability along with protection for work-surface from the non-mar contact-trip
- Mechanical rather than gas operation offers consistent performance at temperature between -20 and 50 degrees Celsius and minimal cleaning/service requirements
- Gas free operation offers a significant saving in running costs
DCK264P2T-GB What’s Included
- DCN660 18v Finishing Nailer
- DCN692 Brushless 2 Speed Framing Nailer
- DCB184 18v 5ah Batteries
- DCB115 Multi-Voltage Charger
- DS400 Tough System Kit Box
- Kit Size: 2-Piece
- Number of Batteries Supplied: 2
- Voltage: 18v
- Type: Brushless