TREND T33AL 110v Wet & Dry M-Class Extractor
T33AL Product Overview
The Trend T33AL is an M-Class extractor with power take off for high performance hazardous dust capture
Part No: T33AL(TRENDT33AL)
T33AL Technical Specifications
- Power input: 1200 watt
- Voltage: 110 volt
- Dust category: M-Class
- Container capacity: 25 L dry, 17 L wet
- Bag capacity: 16.5 L
- Synchronised Power take off: 1500w max, 60w min
- Sound pressure Lpa: 82 dB(A)
- Max suction: 147 mbar
- Flow rate: 23 l/s
- Negative pressure: 14.7 Kpa
- Cable: 5M
- Hose: 5 M x 39mm OD
- Vibration: <2.5
- Acoustic pressure Lwa: 94 dB(A)
- Weight: 8.34 kg
- Dimensions HxWxD: 633x360x360 mm
- Power tool adaptor OD: Taper 32 to 36 mm
TREND T33AL 110v Wet & Dry M-Class Extractor
T33AL Key Features
- The M-Class extraction meets HSE Construction site regulations to capture microscopic harmful dust particles including silica and MDF dust
- High performance H13 Pleated HEPA Filter System traps dust as fine as 0.3 microns and above, equating to 99.5% of particulates
- The 1000W auto-start power take off allows the extractor to auto start when a power tool is connected with 35 second run on delay to clear residual debris
- Dual function pick up for dry materials and wet pick up with auto stop function when liquid capacity is reached
- Push button filter cleaning with shake down function clears fine dust build up from the filter to maintain efficient suction power
- 25 litre dry/17 litre wet capacity for longer run times between emptying
- The large dust bag capacity captures bigger particles for increased efficiency and safe disposal
- Low flow indicator for filter and dust collection management, signals when the extraction power is low
- Heavy duty plastic tank ideal for liquid pick up and high impact protection
- Liquid drain off port at the bottom of the tank for easy emptying without lifting
- Comes supplied with a full set of cleaning tools for general vacuum cleaning purposes
- 5 metre hose and 5 metre cable for extended working distances from a power point
- Four swivel castors for easy manoeuvrability around the jobsite
T33AL What’s Included
- 1 x HEPA Cartridge Filter
- 1 x 5m Flexible Hose
- 1 x Hard Floor Brush
- 1 x Round Brush
- 1 x Crevice Tool
- 1 x Curved Metal Tube
- 2 x Metal Tubes
- 1 x Power Tool Adaptor
- 1 x Synthetic Filter Bag
- Type: M-Class
Please Note
This is a 110v machine and must be used in conjunction with a power tool transformer.