TREND GAUGE/D60 Digital Depth Gauge 60mm Jaw

Part No: GAUGE/D60(TRENDGAUGE/D60)

• Digital depth gauge for router tables and saw benches
• Horizontal and vertical measuring
• For hand routers, router tables and saw benches
• LCD readout for mm, imperial and fractions with auto shut off 5 mins
• Removable pin to allow hole depths to be measured
• Pin can be parked on arm
• Hole depth 50.8mm (2 inch)
• Self standing with magnetic feet and flat back
• Injection plastic moulding with plastic rule.6
• 0mm wide aperture
• Read-out has relative co-ordinate and absolute function
• Includes small rebate clip that fits to the base of the rule to allow the rule to be set flush to a router table back fence
• Spare battery available Ref BAT/CR2032/3V
• For UK sale only

• Measuring range: 80 mm (3-1/8")
• Opening width: 60 mm (2-3/8")
• Resolution: 0.05 mm (0.002")
• Accuracy: +/- 0.1 mm (0.004")
• Repeatability: +/- 0.1 mm (0.004")
• Max. measuring speed: 1.5 m/s (60 in/s)
• Weight: 92g
• Voltage: 3 volt
• ABS mode (Absolute): Measuring single amounts from Zero
• INC mode (Relative): Measuring from last point
• End of life: See below for Environmental Policy link