TREND

TREND

Page: 1 | 2 | 3 |
  • display as grid Grid
  • display as list List

TREND CR/QR/SET/1 30 piece Craft Pro QR Drill...
This set contains: 1 x 60 mm Quick change magnetic...
TREND CR/QR/SET/1 30 piece Craft Pro QR Drill Bit Set
£29.00 inc
VAT

(£24.17 ex VAT)
Highly Rated
TREND GRAB/ME1/SET 4pc Micro-Grabit Screw Remover...
Screw sizes: No.5 to No.14 Screws sizes: 3 mm to...
TREND GRAB/ME1/SET 4pc Micro-Grabit Screw Remover SetTREND GRAB/ME1/SET 4pc Micro-Grabit Screw Remover Set
£23.40 inc
VAT

(£19.50 ex VAT)

Highly Rated
TREND GRAB/SE1/SET 2pc Pro-Grabit Screw Remover...
Screw sizes: No.6 to No.14 Screws sizes: 3.5 mm...
TREND GRAB/SE1/SET 2pc Pro-Grabit Screw Remover SetTREND GRAB/SE1/SET 2pc Pro-Grabit Screw Remover Set
£13.70 inc
VAT

(£11.42 ex VAT)
TREND T18S/BA5A 18v 5ah Battery 18650
This genuine Trend accessory is compatible with all...
TREND T18S/BA5A 18v 5ah Battery 18650TREND T18S/BA5A 18v 5ah Battery 18650
£39.00 inc
VAT

(£32.50 ex VAT)

TREND T18S/CS165B 18v Brushless 165mm Circ Saw...
The Trend T18S/CS165B 18v Brushless 165mm Circular...
TREND T18S/CS165B 18v Brushless 165mm Circ Saw BODY ONLYTREND T18S/CS165B 18v Brushless 165mm Circ Saw BODY ONLY
£44.50 inc
VAT

(£37.08 ex VAT)
TREND BSC/0/100 Wooden Biscuits No.0 - Pack of...
Biscuit jointing has proven to be one of the strongest,...
TREND BSC/0/100 Wooden Biscuits No.0 - Pack of 100TREND BSC/0/100 Wooden Biscuits No.0 - Pack of 100
£7.03 inc
VAT

(£5.86 ex VAT)

TREND BSC/10/100 Wooden Biscuits No.10 - Pack...
Biscuit jointing has proven to be one of the strongest,...
TREND BSC/10/100 Wooden Biscuits No.10 - Pack of 100TREND BSC/10/100 Wooden Biscuits No.10 - Pack of 100
£7.03 inc
VAT

(£5.86 ex VAT)
TREND STEALTH/ML Airstealth Half Mask Medium /...
Weight: 131g Size: Medium / Large Respiratory protection:...
TREND STEALTH/ML Airstealth Half Mask Medium / LargeTREND STEALTH/ML Airstealth Half Mask Medium / Large
£22.99 inc
VAT

(£19.16 ex VAT)

TREND AIR/M/FF/M AirMask Pro Full Mask - Medium
Rating: DIY/Craftsman/Professional Approval to:...
TREND AIR/M/FF/M AirMask Pro Full Mask - Medium
£126.71 inc
VAT

(£105.59 ex VAT)
TREND AIR/M/FF/S AirMask Pro Full Mask - Small
Rating: DIY/Craftsman/Professional Approval to:...
TREND AIR/M/FF/S AirMask Pro Full Mask - Small
£106.70 inc
VAT

(£88.92 ex VAT)

TREND T18S/AG115B 18v Brushless 115mm Grinder...
The Trend 115 mm T18S/AG115B 18v Brushless Angle Grinder...
TREND T18S/AG115B 18v Brushless 115mm Grinder BODY ONLYTREND T18S/AG115B 18v Brushless 115mm Grinder BODY ONLY
£39.95 inc
VAT

(£33.29 ex VAT)

TREND T18S/ROS125B 18v 125mm Random Orbit Sander...
The Trend T18S/ROS125B 125 mm random orbital sander...
TREND T18S/ROS125B 18v 125mm Random Orbit Sander BODY ONLYTREND T18S/ROS125B 18v 125mm Random Orbit Sander BODY ONLY
£28.50 inc
VAT

(£23.75 ex VAT)
TREND CSB/160/3PK 160mm Craft Saw Blade 3pk
These blades are part of a range of Tungsten Carbide...
TREND CSB/160/3PK 160mm Craft Saw Blade 3pkTREND CSB/160/3PK 160mm Craft Saw Blade 3pk
£29.99 inc
VAT

(£24.99 ex VAT)

TREND CSB/165/3PK/A 165mm Craft Saw Blade 3pk
This is a multi-pack of same diameter sawblades designed...
TREND CSB/165/3PK/A 165mm Craft Saw Blade 3pkTREND CSB/165/3PK/A 165mm Craft Saw Blade 3pk
£29.03 inc
VAT

(£24.19 ex VAT)
TREND CSB/165/3PK/B 165mm Craft Saw Blade 3pk
This is a multi-pack of same diameter sawblades designed...
TREND CSB/165/3PK/B 165mm Craft Saw Blade 3pkTREND CSB/165/3PK/B 165mm Craft Saw Blade 3pk
£25.69 inc
VAT

(£21.41 ex VAT)

TREND CSB/165/3PK/C 165mm Craft Saw Blade 3pk
This multi-pack of same diameter, thin kerf sawblades...
TREND CSB/165/3PK/C 165mm Craft Saw Blade 3pkTREND CSB/165/3PK/C 165mm Craft Saw Blade 3pk
£25.01 inc
VAT

(£20.84 ex VAT)
TREND CSB/190/3PK 190mm Craft Saw Blade 3pk
This is a multi-pack of same diameter sawblades designed...
TREND CSB/190/3PK 190mm Craft Saw Blade 3pkTREND CSB/190/3PK 190mm Craft Saw Blade 3pk
£24.67 inc
VAT

(£20.56 ex VAT)

TREND CSB/CC25024T 250mm x 30mm 24T Craft Blade
This blade is part of a range of Tungsten Carbide Tipped...
TREND CSB/CC25024T 250mm x 30mm 24T Craft BladeTREND CSB/CC25024T 250mm x 30mm 24T Craft Blade
£26.71 inc
VAT

(£22.26 ex VAT)
TREND CSB/PT165/3PK 165mm Panel Craft Blade 3pk
This is a multi-pack of same diameter sawblades designed...
TREND CSB/PT165/3PK 165mm Panel Craft Blade 3pkTREND CSB/PT165/3PK 165mm Panel Craft Blade 3pk
£39.32 inc
VAT

(£32.77 ex VAT)

TREND CSB/16048 160mm x 20mm 48T Craft Saw Blade
This sawblade is designed for a professional finish...
TREND CSB/16048 160mm x 20mm 48T Craft Saw BladeTREND CSB/16048 160mm x 20mm 48T Craft Saw Blade
£10.80 inc
VAT

(£9.00 ex VAT)
TREND CSB/16048A 160mm x 20mm 48T Craft Saw Blade
This sawblade is designed for a professional finish...
TREND CSB/16048A 160mm x 20mm 48T Craft Saw BladeTREND CSB/16048A 160mm x 20mm 48T Craft Saw Blade
£13.68 inc
VAT

(£11.40 ex VAT)

TREND CSB/23524 235mm x 30mm 24T Craft Saw Blade
This blade is part of a range of Tungsten Carbide Tipped...
TREND CSB/23524 235mm x 30mm 24T Craft Saw BladeTREND CSB/23524 235mm x 30mm 24T Craft Saw Blade
£18.59 inc
VAT

(£15.49 ex VAT)
TREND CSB/AP16052 160mm x 20mm 52T Craft Blade...
This blade is part of a range of Tungsten Carbide Tipped...
TREND CSB/AP16052 160mm x 20mm 52T Craft Blade AluminiumTREND CSB/AP16052 160mm x 20mm 52T Craft Blade Aluminium
£25.28 inc
VAT

(£21.07 ex VAT)

TREND CSB/AP25084 250mm x 30mm 84T Craft Blade...
This blade is part of a range of Tungsten Carbide Tipped...
TREND CSB/AP25084 250mm x 30mm 84T Craft Blade AluminiumTREND CSB/AP25084 250mm x 30mm 84T Craft Blade Aluminium
£38.76 inc
VAT

(£32.30 ex VAT)
TREND FT/165X48X20 165mm x 20mm ATB Saw Blade
These blades are laser cut from hardened, chrome alloyed...
TREND FT/165X48X20 165mm x 20mm ATB Saw BladeTREND FT/165X48X20 165mm x 20mm ATB Saw Blade
£53.05 inc
VAT

(£44.21 ex VAT)

TREND CSB/250/3PK 250mm Saw Blade 3 pack
This is a multi-pack of same diameter Tungsten Tungsten...
TREND CSB/250/3PK 250mm Saw Blade 3 packTREND CSB/250/3PK 250mm Saw Blade 3 pack
£61.72 inc
VAT

(£51.43 ex VAT)
TREND MS/C/100TD 100mm Compact Tote c/w Divider
Width: 530 mm Depth: 310 mm Height: 130 mm Capacity:...
TREND MS/C/100TD 100mm Compact Tote c/w DividerTREND MS/C/100TD 100mm Compact Tote c/w Divider
£18.67 inc
VAT

(£15.56 ex VAT)

TREND T32/1/5 Micro Paper Filter Bags 5 pack
Filter Bag for Trend T32 Dust Extractor Capacity...
TREND T32/1/5 Micro Paper Filter Bags 5 pack
£26.54 inc
VAT

(£22.12 ex VAT)
TREND MS/PRO Multiscribe Pro
The Multiscribe is a profile matching tool used to...
TREND MS/PRO Multiscribe ProTREND MS/PRO Multiscribe Pro
£34.37 inc
VAT

(£28.64 ex VAT)

TREND M/KWS01 Kitchen Worktop Offset Scriber
Offset: 8.65 mm Use with jigs: All Trend worktop...
TREND M/KWS01 Kitchen Worktop Offset ScriberTREND M/KWS01 Kitchen Worktop Offset Scriber
£21.70 inc
VAT

(£18.08 ex VAT)
TREND C014X1/4TC Two Flute Cutter 9.5mm x 24.5mm
This Cutter is suitable for a wide range of applications...
TREND C014X1/4TC Two Flute Cutter 9.5mm x 24.5mmTREND C014X1/4TC Two Flute Cutter 9.5mm x 24.5mm
£10.73 inc
VAT

(£8.94 ex VAT)

TREND C174X8MMTC Router Dowel Drill 5mm x 35mm
Lip and spur dowel drills for use with the Trend Craft...
TREND C174X8MMTC Router Dowel Drill 5mm x 35mmTREND C174X8MMTC Router Dowel Drill 5mm x 35mm
£12.85 inc
VAT

(£10.71 ex VAT)
TREND C011X1/4TC Two Flute Cutter 7.9mm x 19.1mm
D: 5/16 inch D: 7.9 mm C: 3/4 inch C: 19.1 mm...
TREND C011X1/4TC Two Flute Cutter 7.9mm x 19.1mmTREND C011X1/4TC Two Flute Cutter 7.9mm x 19.1mm
£9.19 inc
VAT

(£7.66 ex VAT)

TREND C019AX1/4TC Two Flute Cutter 12mm x 19mm
This Cutter is suitable for a wide range of applications...
TREND C019AX1/4TC Two Flute Cutter 12mm x 19mmTREND C019AX1/4TC Two Flute Cutter 12mm x 19mm
£22.01 inc
VAT

(£18.34 ex VAT)
TREND C019X1/4TC Two Flute Cutter 12mm x 19.1mm
D: 15/32 inch D: 12 mm C: 3/4 inch C: 19.1 mm...
TREND C019X1/4TC Two Flute Cutter 12mm x 19.1mmTREND C019X1/4TC Two Flute Cutter 12mm x 19.1mm
£16.69 inc
VAT

(£13.91 ex VAT)

TREND C056AX1/2TC Radius Cutter 9.5mm x 32mm
This Trend Craft Pro Cutter has Tungsetn Carbide Tipped...
TREND C056AX1/2TC Radius Cutter 9.5mm x 32mmTREND C056AX1/2TC Radius Cutter 9.5mm x 32mm
£37.10 inc
VAT

(£30.92 ex VAT)
TREND C172MX1/2TC Two Flute Cutter 12mm x 63mm
This cutter is suitable for a wide range of applications...
TREND C172MX1/2TC Two Flute Cutter 12mm x 63mmTREND C172MX1/2TC Two Flute Cutter 12mm x 63mm
£30.48 inc
VAT

(£25.40 ex VAT)

TREND C209X1/4TC Intumescent Cutter 24mm x 10mm
D: 24 mm C: 10 mm B: 16 mm E: 4 mm Overall Length:...
TREND C209X1/4TC Intumescent Cutter 24mm x 10mmTREND C209X1/4TC Intumescent Cutter 24mm x 10mm
£35.51 inc
VAT

(£29.59 ex VAT)
TREND C220X1/4TC Intumescent Cutter 24mm x 15mm
D: 24 mm C: 15 mm B: 16 mm E: 4 mm Shank Diameter:...
TREND C220X1/4TC Intumescent Cutter 24mm x 15mmTREND C220X1/4TC Intumescent Cutter 24mm x 15mm
£37.25 inc
VAT

(£31.04 ex VAT)

TREND DWS/W6/FC 6x2" Double Side Bench Stone...
Size: 152 mm x 50 mm x 8 mm Grade: Ex-Fine &...
TREND DWS/W6/FC 6x2" Double Side Bench Stone Fine/CoarseTREND DWS/W6/FC 6x2" Double Side Bench Stone Fine/Coarse
£42.43 inc
VAT

(£35.36 ex VAT)
TREND FTS/S/R 100G Silver Roughing Stone
Size: 75 mm x 24 mm x 4 mm Grade: Extra extra coarse...
TREND FTS/S/R 100G Silver Roughing StoneTREND FTS/S/R 100G Silver Roughing Stone
£13.00 inc
VAT

(£10.83 ex VAT)

TREND D/LIFT/B Door Lift - Swivel Type
Lifts to height: 60 mm Maximum door weight: 75...
TREND D/LIFT/B Door Lift - Swivel TypeTREND D/LIFT/B Door Lift - Swivel Type
£18.50 inc
VAT

(£15.42 ex VAT)
TREND CDJ300 Craft 300mm Dovetail Jig
Rating: Craftsman Dovetail size: 12.7 mm Cutter...
TREND CDJ300 Craft 300mm Dovetail JigTREND CDJ300 Craft 300mm Dovetail Jig
£114.72 inc
VAT

(£95.60 ex VAT)

TREND DG/JIG Draining Groove Jig
Fall: 0.5 degree Groove pitch: 50 mm Groove length:...
TREND DG/JIG Draining Groove JigTREND DG/JIG Draining Groove Jig
£139.99 inc
VAT

(£116.66 ex VAT)
TREND KWJ/PIN/4 10mm Plastic Pins - Pack of 4
D: 10 mm Location pins for the KWJ700 and KWJ900...
TREND KWJ/PIN/4 10mm Plastic Pins - Pack of 4
£6.82 inc
VAT

(£5.68 ex VAT)

TREND LOCK/JIG/B Adjustable Trade Lock Jig
Door thickness min.: 30 mm Door thickness max.:...
TREND LOCK/JIG/B Adjustable Trade Lock JigTREND LOCK/JIG/B Adjustable Trade Lock Jig
£104.99 inc
VAT

(£87.49 ex VAT)
TREND SM/TSP Tenon Slide Saw
Max. working length: 190 mm Max. tenon length adj.:...
TREND SM/TSP Tenon Slide SawTREND SM/TSP Tenon Slide Saw
£39.48 inc
VAT

(£32.90 ex VAT)
Page: 1 | 2 | 3 |
  • display as grid Grid
  • display as list List
 

TREND Categories

TREND has been designing and developing router technologies since 1955. A recognised brand with a reputation for high-quality, they operate in three key market segments: professional carpentry and woodworking, trade range products and home DIY. As well as a comprehensive range of router cutters, TREND have also developed a range of custom jigs enabling customers to achieve routing tasks that would normally require much more specialist machinery.

The TREND Professional power tool range can be covered by a three-year extended warranty when registered online.

 


Trend Tools FAQs

Where are Trend based?

Trend are the UK’s leading brand of routers, router cutters, jigs and routing accessories. They have been designing and developing router technologies since 1955, creating time saving solutions for both professionals and hobbyists. Trend’s UK headquarters can be found in Watford on Odhams Trading Estate. We are a UK based approved Trend Tools stockist and have successfully worked with Trend for many years. A select range of Trend tools are also available in the USA through a network of dealers, online at Amazon, and directly through the Trend USA website. Trend products are also available online from ecommerce partners in Europe, New Zealand, and Australia.

We can deliver Trend tools to you tomorrow if your order is placed before 4pm Monday to Thursday. We offer free delivery on all orders over £30 and a signature will be required to acknowledge delivery. If nobody is available to accept and sign for the delivery, the courier will leave a card to advise that delivery has been attempted and you will need to follow the instructions on the card to receive your order.

Are Trend a reliable brand?

Trend are a recognised brand with a reputation for high quality and innovation. Their products are used by professional tradesmen, keen DIYers, and crafting enthusiasts. They’ve been developing and supplying router technologies, jigs, and a full range of routing accessories since 1955.

Their positive approach to tools and technology is not limited to product development ¬– you can also expect their service to deliver beyond expectation. They have built a non-compromising reputation for outstanding service in customer care, technical advice, and logistics over the years.

Precision engineered to the highest standards, Trend tools are used in industrial applications, fulfilling the needs of modern routing technology where machining performance relies on the highest possible standard of excellence. Their professional range is aimed at the most demanding applications in manufacturing and woodworking trades.

What type of tools do Trend manufacture?

Trend tools are designed and engineered for trade professionals, DIYers and hobbyists. Their professional range offer routing solutions with a range of routers suitable for a wide range of applications with extensive cutter profiles for general and specialist use. So whether you’re on the jobsite, the factory floor or the joinery workshop you’ll find a huge range of routers designed to cope with the most demanding situations. For craft and DIY enthusiasts, Trend offer a range of high-quality routers, cutters, and jigs.

What batteries work with Trend power tools?

Trend T18S batteries benefit from the latest advanced electronics that help to regulate the amount of power required to complete an application. Their technology protects the battery from overcharging or overheating and prevents charging when the cells are not in a suitable state to do. This protects you and the tool and maximises runtime with no unnecessary power drain. You can enjoy increased productivity through compact and powerful motors that minimise the size and weight of the tool while maximising the power output.

There are three T18S batteries to choose from. The T18S 2Ah compact battery is ideal for fast and light strain work, like sanding and light drilling where you need control over longevity. For routing applications, heavy sanding and drilling and demanding cutting, the slimline T18S 4Ah battery is slimmer and lighter than the TS18S 5Ah battery, but almost matches its power capacity. The T18S 5Ah heavy duty battery comes into its own in high power, high torque applications where the motors are demanding constant power.

What is a Trend router?

Perfect for edging and creating decorative features, a router is a handheld power tool that is used to hollow out wood. For intricate woodwork and metalwork, very few tools match the router, with the latest models offering a range of useful functions and settings, including adjustable speeds for improved accuracy.

Creating woodworking joints is easy with a Trend handheld or table mounted router when used with the appropriate jigs, guides, cutters, and accessories. At Toolstore UK, we stock a wide range of Trend tools and their accessories that can be used for things like trimming and edging, joint making, grooves, moulding, beading, and creating holes.

There are different types of routers. One of the most popular types of router is the plunge router that cuts from above in a similar way to a drill press. Fixed base routers have a body and base that are fixed together. It cannot plunge into the workpiece from above – it can only start from the edge.

Are Trend router bits any good?

A good quality router bit will be sharp and ready to use. Trend have extensive expertise producing routing and woodworking tool bits with expertly ground edges. All Trend products are produced to the highest possible specifications and packaged to ensure you receive them in the best possible condition.

Ensure your router bits have smooth surfaces, with no chips, cuts, or nicks that could gather dirt and dust. These may shorten the life of your bit and even ruin your work by throwing the bit out of balance or slowing it down.

With tungsten carbide-tipped routing bits, check the thickness of the carbide edges. The thicker the edge, the more times it can be sharpened. You’ll notice most Trend cutters are designed to be sharpened several times and the thicker carbide also offers more support to the edges when you’re working.