MICROJIG ZP750-B2S2 ZEROPLAY Miter Bar 2 pack

Tired of imprecise jigs and sleds? ZEROPLAY Miter Bars are the answer. Their one-touch calibration eliminates side-to-side play for perfect cuts, and they're easy to adjust even when mounted. Get superior accuracy and faster setup for all your table saw projects. Works with standard miter slots and even fits on ShopSmith and General saws. Use two bars together for long jigs and handle larger materials with confidence.

Part No: ZP750-B2S2(TOMAZP750-B2S2)

Fits any standard 3/4 x 3/8 T-Track Miter Slots, ShopSmith and General 350 Tracks.
Hassle-free miter bars using One-Touch Calibration
No slop, side-to-side play or seasonal warping
Top-down installation for easy and fast mounting to jigs, fixtures and sleds
Fits standard (3/4"" x 3/8"") T miter slots, ShopSmith and General miter tracks
Includes 2 ZEROPLAY miter bars, 2 ZEROPLAY miter stops and cross cut jig plans
For T-Track Miter Slots Only
9.5-Inch length

MICROJIG ZP750-B2S2 ZEROPLAY Miter Bar 2 pack

In stock

30 DAYSReturns

Includes ZEROPLAY Miter Stop, a reliable and precise hold-down anchors for table saw tops and miter T-tracks.
Build custom hold-downs for T-TRACK miter slots.
Perfect for accurate repeat cuts for sliding table saw sleds.
A must-have for clamping, slotting, stopping, and more.
Use for point A and B stops for slotting.
Locks woodworking jigs in position.

2x ZeroPlay Miter Bars
2x ZeroPlay Miter Stops
1x 3/32 Hex Wrench
6x #8-32 x 1/2" Pan Head Machine Screws
6x #10 Flat Washers
6x #8-32 x 3/16" Button Head Screws
2x 1/4-20 1 3/4" Carriage Bolt
2x 1/4-20 Thumb Knob
2x 5/16 OD O-Rings
2x 1/4" x 1/2" Stainless Flat Washer
2x Nylon 1/4-20 x 1/4" Set Screw

Our Expert Says…

ZEROPLAY Miter Bars are hassle-free, dead-on accurate, and super-simple to use. Build better, more accurate jigs, sleds, and fixtures faster. Your projects will thank you.
Create perfectly square crosscut jigs fast. The ZEROPLAY Miter Bar System takes miter bars and table saw sleds to the next level of precision. By using the One-Touch Calibration, you instantly fill the full width of the miter slot for no side-to-side play. You can adjust the bar while its attached to the sled making it easier, faster, and more accurate when moving from machine to machine.
Top-down installation lets you keep your sled square to the fence while you secure the ZEROPLAY Miter Bar for a hassle-free setup and precision cuts. Fits any standard 3/4 x 3/8 T-Track Miter Slots, ShopSmith, and General 350 Tracks. Use two ZEROPLAY Miter Bars in tandem to create long sleds and jigs. Handle larger materials safer and more accurately.

Delivery & Returns

We offer free delivery on orders over £55, placed before 4pm Monday to Thursday. Note that next day delivery for orders placed after 4pm on Thursday, up to 4pm Friday, is usually Monday (excluding bank holidays). Estimated delivery for all orders placed over a weekend is Tuesday. Note that due to the size and weight of some products, next working day delivery is not available and additional carriage charges will apply. If you would like to return your goods, we will offer a full refund or exchange within 30 days of purchase. For full details, visit our delivery and returns page. Ts&Cs apply.

Warranty

All of our products come with a standard 1 year manufacturers warranty, however if you would like to discuss extending this warranty, please contact our customer service team on 03330 043777, or email customerservices@toolstoreuk.co.uk. For further warranty information from this specific manufacturer, visit our warranty page.