KREG KJDECKSYS20 Deck Jig System
KJDECKSYS20 Product Overview
Create a better, more-beautiful deck with the Kreg Deck Jig. This concealed-fastening system works together with Kreg Deck Screws to allow you to install decking without visible fasteners, so all you see is the beauty of your decking instead of a bunch of screws. The Deck Jig features hardened-steel guides to drill precisely positioned pilot holes, and to guide Deck Screws to attach decking from the edge solidly and invisibly whether youre using solid-wood or composite deck boards.The Deck Jig makes drilling the stepped pilot holes and driving screws easy in all situations thanks to three hardened-steel guidesone at 90° to the board edge, and two at opposing 45° anglesthat allow easy access when working near walls, as well as when creating strong joints where boards butt together end to end. The stepped drill bit creates a perfectly positioned pocket hole and clearance hole for the Kreg Deck Screw, while a stop collar ensures prefect drilling depth.After drilling, just drop a Kreg Deck Screw, an integral part of this concealed-fastening system into the same guide, and then drive it with the included square-drive driver bit. Its equipped with a stop collar, too, to ensure that the self-tapping, case-hardened screw gets driven to the perfect depth. The aggressive threads bite securely into the joist, while the smooth upper shank and flat-bottom head work together to pull the deck board tightly in to place.The Deck Jig Concealed-Fastener System works with composite decking, as well as solid-wood decking such as cedar, hardwoods, and pressure-treated woodkiln-dried after treatment (KDAT) recommended.
Part No: KJDECKSYS20(TOMAKJDECKSYS20)
KJDECKSYS20 Technical Specifications
- Features:
- Installs concealed deck fasteners
- Three hardened-steel drill guides
- Construction: Impact-resistant polymer, hardened steel
- Compatibility:
- Protec-Kote Deck Screws
- Stainless Deck Screws
- 1/4" Spacer Rings
- Deck Jig Drill Bit Set
- Deck Jig Driver Bit Set
KREG KJDECKSYS20 Deck Jig System
KJDECKSYS20 Key Features
- The Kreg Deck Jig helps you get the deck you want, without any unsightly exposed nails or screws
- Concealed-fastener system for installing deck boards
- Easy-grip handle gives you a secure hold and complete control over each and every joint
- Hardened-steel guides keep the stepped drill bit and driver bit at the precise, optimal angle
- Three lifetime-warranted, hardened-steel drill guides let you install deck boards in a variety of hard-to-reach areas
- Handy spacer rings ensure accurate deck board spacing for proper drainage and longer deck life
KJDECKSYS20 What’s Included
- 1 x Deck Jig
- 1 x Deck Jig Drill Bit
- 1 x Deck Jig Driver Bit
- 2 x Stop Collars
- 1 x Hex Wrench
- 3 x " Spacer Rings
- 1 x Owner's Manual