DEWALT DCD740N 18v XR Angle Drill Drive BODY ONLY

Angle Drills are the go-to tool when you need to get into a tight space and a traditional drill is just too big for the job. An Angle Drill has a short driving section and long handle with the screw head set at 90 degrees to the handle.
Think about the maximum drilling capacity each drill is capable of, as this effects how efficiently you can work.
The No Load Speed can give you an indication of how powerful the tool is, which can be an important consideration when working continuously with a single machine. Another thing to consider is whether you want a tool with a keyless chuck to speed up bit changes.

Brushed motors use carbon brushes to transfer power from the fixed part of the motor to the rotor. This creates a reliable and relatively inexpensive motor, but brushed motors do require regular maintenance, in order to either clean the brushes or replace them as they wear out. A brushless motor, by contrast, uses a magnet mounted on the rotor to generate the power and electrical switching to perform the function carried out by the brushes. The additional complexity of the motor’s working means that brushless motors are usually more expensive than brushed.
However, eliminating the brushes also eliminates internal friction and maintenance, meaning that brushless motors offer both increased power and a longer working life. Brushless motors also generate less heat and noise and so, on balance, are considered superior to brushed motors.

Our range of Cordless Angle Drills starts with 12v machines, but the increased power and relative affordability of 18v tools means this has become the industry standard, particularly as the 18v machines offer much more power without a huge increase in tool size.