TREND UNIBASE Universal Sub-base with Pins & Bush
Part No: UNIBASE(TRENDUNIBASE)
UNIBASE Technical Specifications
- Diameter: 170 mm
- Thickness: 8 mm
- Bore: 39 mm
- Recess: 60 mm
TREND UNIBASE Universal Sub-base with Pins & Bush
Hurry, low stock
UNIBASE Key Features
- The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes
- It will fit directly to most routers
- Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base
- Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch
- Instructions for fittingThe line-up pin fit into the collet and is plunged through the router base
- The line-up bush is fitted into the Unibase and secured
- This is then placed over the line-up pin and rotated in order to line up the fixing holes
- The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes
- These range from 10mm up to 30mm (GB10 - GB32)
- For larger diameter cutters a 40mm guide bush (GB40) is available
UNIBASE What’s Included
- Type: Router Base