TREND LOCK/JIG Lock Jig
Part No: LOCK/JIG(TRENDLOCK/JIG)
LOCK/JIG Technical Specifications
- Door thickness min.: 34 mm
- Door thickness max.: 58 mm
- Template outer size: 234.3 x 59.8 x1.5mm
- Includes templates for locks having the following face-plate dimensions:
- Metric (Imperial approx.) (D x OL)=Template
- 22.2x156 mm (7/8"x 6 1/8")=1
- 22.5x152.5 mm (7/8"x 6")=2
- 25.4x121 mm (1"x 4 3/4")=3
- 25.4x127.5 mm (1"x 5")=4
- 25.4x133.5 mm (1"x 5 1/4")=5
- 25.4x145 mm (1"x 5 3/4")=6
- 25.4x153 mm (1"x 6")=7
- 25.4x156.5 mm (1"x 6")=8
- 25.4x165.5 mm (1"x 6 1/2")=9
- 25.4x177 mm (1"x 7")=10
- 25x57.5 mm (1"x 2 1/4")=11 UPPER
- 26x56.5 mm (1"x 2 1/4")=11 LOWER
- 25.6x162mm (1"x 6 3/8")=12
- Mortise Lock Dimensions:
- Imperial (Metric) (D x OL)=Template
- 16x72 mm* (5/8" x 2 7/8")=A
- 16x107 mm* (5/8" x 4 1/4")=B
- 19x78 mm* (3/4" x 3 1/8")=C
- 19x109 mm* (3/4" x 4 1/4")=D
*These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel. Actual length of mortise is 7mm longer.
TREND LOCK/JIG Lock Jig
Sorry, we are out of stock
LOCK/JIG Key Features
- Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks
- For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate
- Deeper mortises can be achieved with a suitable size of auger bit
- Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood
- Steel plates & body
- An auger bit and drill is required to complete deep mortises
- The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter
- A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise
LOCK/JIG What’s Included
- Type: Door Jigs