Skip to main content

TREND HINGE/JIG Contractor Hinge Recessing Jig

TREND HINGE/JIG Contractor Hinge Recessing Jig

RRP £306.53
£190.00 inc VAT (£158.33 ex VAT)

updown

low stock Hurry, low stock

Compare this product

add to compare

Enter your postcode to view postage options

Part No: HINGE/JIG(TRENDHINGE/JIG)

About TREND HINGE/JIG Contractor Hinge Recessing Jig

    Hinge sizes possible

    • Length min.=2 5/8" (67 mm)
    • Length max.=5" (127 mm)
    • Width min.=3/8" (9.5 mm)
    • Width max.=1 3/8" (35 mm)
    • Width max. in 35mm rebate=20 mm
    • Width max. in 44mm rebate=30 mm

    Door sizes possible

    • Height min.=6' 5" (1955 mm)
    • Height max.=2100 mm*
    • Thickness min.=5/8" (16 mm)


    • Weight = 2.9 kg
    • Jig overall length=1957 mm
    • Fixed stop max. thickness=25 mm

    * Please note for doors over 2040mm the bottom hinge will be higher than 9" up.

    Key Specifications

    • Door Jigs

      The single piece Contractor Hinge Jig is designed for recessing hinges in wooden doors & frames with a plunge router

      • It is easy to use with minimal setting-up time, completing the job both accurately & quickly
      • Used on-site & in joinery shops to increase productivity with excellent results
      • Four apertures for fire door requirements
      • No need for marking out in the conventional way
      • Quick & simple to set-up as the hinge is used as the pattern
      • Clean & accurate recesses are achieved every time
      • Suitable for timber based doors & square butt hinges
      • Can be used on both inside and outside doors, and on maximum 25mm thick fixed stops
      • Use with a light duty plunge router with 1/4 inch collet
      • Long reach router cutter required, 12mm diameter with 70mm overall length
      • Angled position slots to prevent creep
      • Unibase may be needed
      • T4EK router requires a Ref UNIBASE or special guide bush Ref GB/T4/160

      Suppled with:

      • 4x Apertures
      • 2x Bradawls with spacer
      • 1x 16mm T-Handle Hex Key
      • 1x 4mm Spacing Gauge
      • 1x Plastic Storage Tube

      Essentials

      TREND C/CHISEL HSS Corner ChiselTREND C/CHISEL HSS Corner Chisel
      £13.78 inc
      VAT

      (£11.48 ex VAT)
      TREND UNIBASE Universal Sub-base with Pins & BushTREND UNIBASE Universal Sub-base with Pins & Bush
      £17.92 inc
      VAT

      (£14.93 ex VAT)
      TREND E/SCRIBE Easy ScribeTREND E/SCRIBE Easy Scribe
      £25.96 inc
      VAT

      (£21.63 ex VAT)

      Video

      We offer free next working day delivery on orders over £100, placed before 4pm Monday to Thursday. Note that next day delivery for orders placed after 4pm on Thursday, up to 4pm Friday, is usually Monday (excluding bank holidays). Estimated delivery for all orders placed over a weekend is Tuesday. Note that due to the size and weight of some products, next working day delivery is not available and additional carriage charges will apply. If you would like to return your goods, we will offer a full refund or exchange within 30 days of purchase. For full details, visit our delivery and returns page. Ts&Cs apply.
      All of our products come with a standard 1 year manufacturers warranty, however if you would like to discuss extending this warranty, please contact our customer service team on 03330 043777, or email customerservices@toolstoreuk.co.uk. For further warranty information from this specific manufacturer, visit our warranty page.

      Customers Also Bought

      Highly Rated
      TREND T5ELB 110V Basic Router
      TREND T5ELB 110V Basic Router
      £148.39 inc
      VAT
      (£123.66 ex VAT)

      TREND C/CHISEL HSS Corner ChiselTREND C/CHISEL HSS Corner Chisel
      TREND C/CHISEL HSS Corner Chisel
      £13.78 inc
      VAT
      (£11.48 ex VAT)

      You May Also Like