TREND CRT/MK3L CraftPro Router Table 110v

Part No: CRT/MK3L(TRENDCRT/MK3L)

• The CraftPro Router Table will suit craftsmen & woodworking enthusiasts
• It is packed with the necessary features to maximise the versatility of all popular portable routers
• Large laminated MDF table
• Quick release aluminum extrusion back fence with sliding MDF cheeks
• Removable 6.3
• 5mm thick aluminium insert plate with 98mm diameter aperture, pre drilled for Trend TBC routers and T11 routers
• Quick Raiser and Quick Release facility for the Trend T11 router
• High back fence with fully adjustable guard assembly
• Fully adjustable side finger pressure
• Full perimeter leg stand with adjustable feet
• Two insert rings 31.8mm and 67.5mm diameter to reduce table aperture
• Lead on pin for bearing guided curved work
• Edge planing facility on back fence of 1.4mm and 2.4mm
• Cable management clips
• No volt release switch
• Mitre fence with zeroing and spelch block facility
• Bench fixing brackets
• Router not included
• For UK sale only.1
• 15v routers over 1850W (including T10 and T11) cannot be used with no volt release switch router tables

• Rating: Craftsman
• Voltage*: 115 volt
• Table top size: 610x405x26mm
• Bench height: 410mm
• Router cutter aperture: 98mm
• Max cutter dia: 80mm
• Max cutter height: 55mm
• Max component length**: 590mm
• Insert ring sizes: 31.8mm, 67.5mm
• Backfence height: 68mm
• Dust spout aperture: 57mm
• Edge planing up to: 1.4 & 2.4mm
• Weight: 13.6kg
• Voltage: 115v
• Max. material thickness with pressures: 60 mm
• Max. material width with pressures: 120 mm (cutter centre)
• End of life: See below for Environmental Policy link
• Not intended for: continuous production or production line use.

*115v routers over 1850W (including T10 and T11) cannot be used with no volt release switch router tables.
**Workpiece supports required for longer lengths.