MAKITA D-18708 100mm Stone Flat Cutting Disc C30S
MAKITA D-18708 100mm Stone Flat Cutting Disc C30S
In stock
Why Not Add
VAT (£2.50 ex VAT)
VAT (£5.97 ex VAT)
VAT (£5.91 ex VAT)
VAT (£1.88 ex VAT)
What’s Included
- 1 x Makita D-18708 100mm Stone Flat Cutting Disc
Product Overview
The D-18708 is engineered specifically for cutting through tough stone, concrete, and brickwork with efficiency and stability. Its composition utilises high-grade silicon carbide abrasive bonded with a medium-hard resin, ensuring the disc retains its cutting edge for longer while delivering a clean, precise finish on mineral-based materials. Whether you are resizing paving slabs or cutting brick to length, this disc provides the durability required for demanding masonry tasks.
Part No: D-18708(MAKACD-18708)
Features & Benefits
- Silicon Carbide Abrasive: Manufactured using premium 'C' grade silicon carbide grain, which is sharper and harder than standard aluminium oxide, making it the ideal choice for cutting non-ferrous materials like stone and concrete.
- Medium Grit Formulation: The '30' grit rating offers an excellent balance, removing material rapidly while maintaining a relatively smooth finish on the cut edge.
- Extended Service Life: A hard 'S' bond holds the abrasive grains in place securely, resisting premature wear even when cutting through abrasive masonry surfaces.
- Flat Profile Design: Built to a Type 41 flat specification, allowing for deep, perpendicular cuts without the interference often caused by depressed centre hubs.
- Broad Material Compatibility: Suitable for use on a wide range of masonry, including brick, natural stone, concrete, and roof tiles.
- Safety Compliance: Produced to meet EN12413 standards, ensuring structural integrity and operational safety during high-speed rotation.
Technical Specification
- Diameter: 100 mm
- Bore Size: 16 mm
- Thickness: 3 mm
- Grit Designation: C30S
- Wheel Type: Flat Cutting Disc (Type 41)
- Material Suitability: Stone / Masonry
- Pack Quantity: 1
FAQs
The first thing to consider is that not all Cutting and Grinding Discs are the same! You’ll need to make sure that the diameter and bore of the disc are appropriate for your tool to make sure it fits.
Then consider the kind of material you’ll be working with. Some of the Cutting and Grinding Discs in the ToolStore UK range are designed for working with metal and others with stone. Even then, there are variations for working with flat stone and metal, or for specific types of cutting.
Then, you should think about how thick the disc is; depending on the kind of material and the type of work you’re doing, you may want to use discs with varying thicknesses.
If you’re choosing a Grinding Disc, think about the level of abrasion material provided; the grit levels provided can vary significantly.
Delivery & Returns
Warranty
Related Products
VAT (£1.57 ex VAT)
VAT (£0.63 ex VAT)
VAT (£0.71 ex VAT)
VAT (£0.89 ex VAT)
VAT (£2.86 ex VAT)
VAT (£3.30 ex VAT)
VAT (£0.71 ex VAT)
VAT (£6.48 ex VAT)
VAT (£1.18 ex VAT)
VAT (£0.96 ex VAT)
VAT (£0.44 ex VAT)
VAT (£0.56 ex VAT)
