MAKITA HR2811FT-1 110v SDS Plus Rotary Hammer Drill + Quick Change Chuck

The HR2811FT-1 Rotary Hammer has a powerful 800 watt motor, with variable speed control, to deliver up to 1,100 rpm, 4,500 bpm and 2.8 joules of impact energy per stroke for faster drilling. The Rotary Hammer has 3 mode operation, Rotary Only, Rotary with Hammer and Hammer Only, with No hammering when idling function to help increase the life of the tool. The HR2811FT-1 has a Quick Change Chuck, adapted for SDS-Plus bits, for quick and easy bit installations and removals and torque limiter to automatically disengage the clutch to prevent gear damage if the bit hits against any reinforcements or jams for operator safety. The Rotary Hammer has a recessed lock on button for continuous operation and depth gauge for drilling consistency.

Part No: HR2811FT-1/1(MAKPHR2811FT-1)

Blows per minute: 0-4,500bpm
No load speed: 0-1,100rpm
Input wattage: 800w
Net weight: 3.6kg
Max. in concrete: 28mm
Max. in steel: 13mm
Max. in wood: 32mm
Max. Core: 80mm
Impact energy per stroke : 2.9Js
Vibration m/sec2 RH: 15m/sec2
With Quick Change Chuck

MAKITA HR2811FT-1 110v SDS Plus Rotary Hammer Drill + Quick Change Chuck

Great news! Buying this product qualifies you for

FREE DELIVERY AVAILABLE*

Sorry, we are out of stock

30 DAYSReturns

HR2811 models have been developed as SDS-plus Rotary hammers positioning between HR2470 and HR3200C series models. Length 345mm.
Double Insulation
Variable speed
With reversing function.
Torque limiter: The drill stops when the bit hits against reinforcements.
Improved dust collection
LED job light for improved work visibility.

1 x Side handle
1 x Depth stop
1 x Quick change chuck
3 x D-03888 5 Pice SDS+ Bit Sets
1 x D-08735 SDS+ Scaling Chisel
1 x Carry case

This is a 110v machine and must be used in conjunction with a power tool transformer.

Delivery & Returns

We offer free delivery on orders over £55, placed before 4pm Monday to Thursday. Note that next day delivery for orders placed after 4pm on Thursday, up to 4pm Friday, is usually Monday (excluding bank holidays). Estimated delivery for all orders placed over a weekend is Tuesday. Note that due to the size and weight of some products, next working day delivery is not available and additional carriage charges will apply. If you would like to return your goods, we will offer a full refund or exchange within 30 days of purchase. For full details, visit our delivery and returns page. Ts&Cs apply.

FAQs

What should I look for when buying an SDS Plus Hammer Drill?

SDS Plus Hammers are tools which pack a lot of punch. They’re designed for driving into masonry, which means that they need to rotate as quickly as possible. On top of that, because their primary role is as a hammer drill, the impact rate – measured in either impacts per minute (ipm) or blows per minute (bpm) is definitely an important characteristic to consider. You should also check the maximum drilling capacity, which determines how far the tool will go into the material you’re working with.

What's the difference between SDS and ‘conventional’ Hammer drills?

The main differences are in the kind of drill bits they use and the amount of power they can bring to a task. Slotted Drive System drills use bits with slots or indentations and a pair of sprung ball bearings at the end of the shaft, which ensure a snug fit into the chuck. The fact that SDS drills usually have faster rotations and provide more blows per minute sets them apart from a ‘traditional’ hammer drill and makes them particularly suitable for tougher drilling tasks, such as driving into concrete.

What's the difference between SDS Plus and SDS Max?

One significant difference between these kinds of tools is the size of the shank. SDS Plus bits typically have a 10mm shank, while SDS Max is 18mm. This means that an SDS Max tool can use SDS Plus drill bits with an adaptor, but SDS Max bits aren’t ‘backwards’ compatible. The other main difference is that an SDS Max drill has even more power than an SDS Plus tool and is designed for working on tougher jobs than you might use the SDS Plus machine for.

Which voltage should I choose?

That depends entirely on the power available on site. The ToolStore UK range includes both 110v and 240v options.

Essentials

MAKITA D-03888 5 piece SDS Plus Drill Bit Set £5.47 inc
VAT (£4.56 ex VAT)

Warranty

All of our products come with a standard 1 year manufacturers warranty, however if you would like to discuss extending this warranty, please contact our customer service team on 03330 043777, or email customerservices@toolstoreuk.co.uk. For further warranty information from this specific manufacturer, visit our warranty page.